megabreath74
New member
There is a "wifi signal strength" option when you select the pop-up dialog action. Is there a way to add a "cell signal strength" option as well?
Thanks!
Thanks!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
"Cell signal strength" variable option?
- Thread starter megabreath74
- Start date
https://www.macrodroidforum.com/ind...-switch-wifi-when-signal-is-low.307/post-1428If you select the WiFi strength option and connect to mobile data, it will show the signal strength in dBm. (Such as - 120)
Yes, I see. So while your phone might display 4G and all bars, this does not mean that the actual Internet package transfer speed is high or low.
What I said in the post was that MD variable 'wifi_strength' gives strength of the signal between the WiFi device (mobile, tablet, computer...) and the box which is wire connected to the net. But I doesn't measure the quantity of data per second (the stream) from the net. Of course if you are too far from your box and the signal is weak, you won't have a good final stream because of the weakness of this part of the network.
According to the cellular signal, the problem is partly the same. A strong signal doesn't mean a good stream if your operator's network is overloaded for instance. But, of course as above, a weak signal will prevent you from having a good stream (because of retries due to data loss).
No, WiFi signal strength is only available to measure signal strength between box and mobileYeah, that's the idea. So, the WiFi signal strength option will work for mobile data.