First Macro- "Going Dark" with checks and balances" configured on *NON-ROOTED Galaxy S9 Plus*

MewMew

New member
This macro will automatically configure a very secure wifi configuration on VPN Unlimited with Always ON and Block Connections W/O VPN configured, Socks5 proxy & a GPS spoofer to match your VPN location! It also will verify certain parameters are either met or not to then adjust its course and either skip a section or opt to configure it if its not already. Can reconnect devices that are "Connected without internet access" usually due to the "Block Connections w/o VPN" setting. All you do is start macro without altering any other macro setting and it functions all the same through IF statements and skipping already configured sections! After all settings are configured it will then launch CCLEANER and do a quick cleanup of your easily scarable personal data you may have forgotten to clean before launch and finishes off by launching tor browser and completing Connection to it.

ALL Settings can be adjusted for any device with some patience and willpower 😅

*Not ready to go right after download*


Requires some apps installed to function and understanding how to pre-configure them to make the macro setup and its unique settings easier to configure correctly.

*If you are testing the macro as a whole after going through and either adjusting the settings to match your specific phone, screen size, apps you chose to substitute or just entering all values in their respective locations, and notice the macro starts to go off course, it happens so you should be prepared sometimes we change the tiles locations or button configuration of our phone and don't notice its not the correct configuration and thats more than enough to de-rail a macro functioning on UI Interaction. Just turn off the screen and wait a couple minutes before opening your phone up again so it doesn't get wildly out of control*


Functions:

1. Kills all background processes and opens fresh instances of VPN Unlimited, EveryProxy and Fake GPS to ensure each click action is exactly where it needs to be.

2. Verifies whether FakeGPS is already running or not. Based upon such, either configures it to "ON" OR skips this step to move onto next configuration

3. Verifies whether VPN Unlimited is already running or not. Based upon such, either configures it to "ON", with "Always ON & Block Connections W/O VPN" configured OR skips this step entirely

4. Verifies whether EveryProxy is already running or not. Based upon such, either configures it to what I preset for "Socks5" to "ON" OR skips this step entirely (to use HTTP, you must reconfigure the UI Interaction)

5. Verifies whether you are connected to your Wi-Fi with no connection strength OR have stable Wi-Fi connection. Based upon such, either reconfigures your device UI's Wi-Fi proxy settings back to "None", allows time for Wifi to organically reconnect, then reconfigures the "Manual" Proxy setting it was just on and saves it to reconnect proxy and re-establish operable wifi connection OR skips this step entirely. (It does this for users who are using this often, it is to ensure if you run the macro and lose Wi-Fi connection while still connected to Wi-Fi. Usually due to your screen turning off for a while which then blocks the connection because of the VPN Unlimited setting activating, that you can easily reset the Wi-Fi connection with ease rather than having to fix it with many steps)

6.Verifies whether all 3 (VPN Unlimited, EveryProxy, and Fake GPS) are running congruently and maintaining operable wifi connection OR is running all 3 congruently and wifi connection is in "Connected W/O internet access" state. It doesn't check if 0, 1 or 2/3 are running, only if 3/3 are running. Previous steps should get you to always having 3/3 running. If anything other than all 3 are running, there's a problem with the macro. May need troubleshooting. If "Connected w/o internet access", it will reconfigure the internal device UI Wi-Fi Proxy back from "Manual to "None", allow time for wifi to reconnect organically, then re-enable to "Manual" so custom socks5 proxy will be reconnected. If all 3 are running and wifi connection is operating, it will skip this step entirely
7. It will then open CCleaner and do a "Quick Clean" to remove any easy to scrape personal data to associate your connection to you.
8. Will finish macro with opening Tor Browser and completing Connection to it.

This macro is intense, I've spent the last two days tweaking and further improving upon it to be truly "Automated", take your time it can be overwhelming but is insanely useful and rewarding when finished!

Required Apps:
You may substitute with further reconfiguration needed.

1. VPN Unlimited (or your preferred VPN but you will need to adjust every UI interaction to make the actions needed to configure it accurately just leave if and break loop configs alone unless mentioning VPN Unlimited)

2.EveryProxy (or your preferred proxy apk, will require further reconfiguration.)

3. FakeGPS (or your preferred GPS spoofing apk, will require further configuration)

4.CCleaner (or your preferred automated backend phone cleaning app with reconfiguration)

5.TOR Browser ("or your preferred secure browser with further reconfiguration required)

Required (or Needs reconfiguration) Settings:

1. Back arrow be preset to very bottom right or reconfigured

2. Recent Apps be preset to very bottom left or reconfigured

3. Wi-Fi be preset as first tile in dropdown quick settings or be reconfigured

4. EveryProxy (or preferred and reconfigured proxy apk) settings need to be known and configured to be input into their respective macro settings

5. VPN Unlimited needs some favorited locations as its configured to choose a favorited location

6. FAKE GPS needs a pre pinned location to ensure its choosing what you wanted when it starts the service

If you have any questions you can optionally email me at mewzzzx@proton.me. okay I'm tired. I think that covers everything, enjoy One Click Anonymity*

*after about 3,000 clicks of trial and error reconfiguration 😅

YOU GOT THIS! DON'T FORGET TO SAVE PERIODICALLY!
 

Attachments

  • Going_Dark_🥸_(Complete_with_Checks_and_Balances).macro
    43.2 KB · Views: 12

MewMew

New member
Might consider adding a mac address changing config within this macro too. Let me know if that would interest anyone for me to update this and add such feature
 
Top